Questions about: bathroom-fixtures

1 Inspect your sink. Check to see how many openings there are and how far apart they are. You may have to look underneath to be sure
Remove oil pan oil pump and pick up tube & screen will be bolted on. You should get oil pump lube, carb. cleaner, new pump oil, oil pan gasket, silicon, oil & filter, loc-tight, gasket remover & tools metric, 1/4 drive socket set, scraper
Plumbing problems can be frustrating, and they never get better with time. Acting quickly to repair a dripping faucet saves you dollars on the water bill. Additionally, waiting until the drip becomes a stream wastes water and causes additional damage
by user3111891 Last Updated February 19, 2016 01:09 AM I'm trying to remove a bathtub diverter spigot, but I can't tell whether it is a screw-on or a slip-on (with a hex bolt at the bottom). My spigot has the notch where a hex bolt would normally be,
It's cheaper for a company to use in-house "off-the-shelf" parts instead of having multiple, specifically tooled assembly lines for each and every model of faucet. The "internal parts" are all likely to be the same. The extra manufacturing cost (we h
0) Unplug the iron. 1) Remove the (2 or more) screws holding the plastic bottom plate (that the iron stands up on). The screws are likely to be #20 Torx "Security" screws -- for which you will need a special bit for your nut/screwdriver
The process of hanging bathroom drywall is nearly identical to doing the work in any other room. The biggest difference, aside from the scope of the project, is the type of gypsum board you use. When hanging it in bathrooms or other rooms where moist
Enjoy longer showers with Camco’s ergonomically designed, handheld RV showerhead Handy on/off switch allows you to pause water flow while shampooing, greatly reducing the amount of water used This showerhead features 4 spray patterns from a drenching
Let me explain what I mean. Most googling leads to tub related setups, but my setups do not include tubs. Lately I have been seeing these diverters in many newer bathrooms(my own new one in SG, and one in India)
As far as I know, having two separate sinks served by a single trap is not code compliant. You will need to replace the existing sanitary tee on the stack (inside of the wall) with a double sanitary tee. Normally, these double tees are used for adjoi